Used to arm at night while staying home, and other family members are expected to arrive home later. This is used when a bad door or window contact prevents the system from arming with any of the other commands.
The installing alarm company may have programmed some zones to behave differently than the above basic descriptions. By itself, Command 4 is used to acknowledge a trouble condition, and will silence a beeping keypad. For help in doing this, see how to stop a beeping Radionics keypad. For most models of Radionics security system, Command 4 can be followed by other digits to perform diagnostic functions.
Command 40 , for instance, will display the first of up to four trouble conditions in the trouble event buffer on and related systems. Command 40 can then be entered 3 more times to display the remaining trouble conditions in the buffer, if there are more than one. This reset momentarily drops power to the 2-wire smoke detector loop, resetting tripped smoke detectors to normal operation.
Check the burglar alarm manuals for your specific Radionics security system and keypad for detailed use of other Command 4 functions. The new code must be entered twice, and both entries must match or the code will revert back to the old value.
For the Radionics system, code changes are started by entering Command Since code changes on the can be tricky, please refer to the detailed instructions in the D, D, or other Keypad User Manual. Toggles the Watch Mode on and off. Depending on the model of Radionics security system, this sound can be a long or short beep, or a pulse of rapid chirps. This is typically used as a hour feature. This is a hour police panic button. The behavior of both Command 7 and Command 9 functions can be changed through system programming, and the specific fire and police response if any can be controlled through special instructions in the central station automation software.
These two allow you to selectively bypass and unbypass individual points on a Radionics security system. They were rarely used in most installations, since the most common need for bypassing was a faulted point due to a bad switch or mis-aligned magnet.
Related Articles. To find out how much a new system might cost, get some free price quotes from alarm dealers in your area.
Just answer a few questions below, and you'll receive your quotes via email. Learn about me, how I built this site, and how you can build one of your own! Disclosure I receive affiliate commissions from some of the companies and products I discuss.
In the last 30 years, expandable systems have advanced to handle zones or more, with about as many user codes available. Radionics Inc is now a part of Bosch Security Systems, an international company offering many intrusion alarm, video, fire, and access control products.
Many Radionics alarm systems used several different keypads with each model of main panel , and Radionics published manuals for all of them. Radionics main panels use a 4-digit model number, such as , , etc. As far as I know, all of the panels listed above are out of production, with the possible exception of the D and D You can find the panel model number on the main control board inside the alarm box that contains the back-up battery.
Radionics keypads use 3- or 4-digit model numbers, again often omitting the D-prefix. Some common keypads include these models: DA D D D D D Keypad model numbers are found on the back of each unit, so removing the keypad from the wall is the fastest way to find the model information. This will bring up images you can compare to your own keypad s , leading you to its model number.
If you have a working code, you can just download the security system manuals you need as described above, and use the system as you like. Radionics alarm systems are proprietary, and sold exclusively through the manufacturer. This means that originally, the only way to purchase Radionics systems was through Radionics authorized dealers. These days, you can purchase used Radionics home security systems on eBay and elsewhere.
Just for fun, I searched for the programmers needed for Radionics panels. Datalock is a feature that enables only the company that originally installed a system to program it. Using the handheld programmer is the only way to change the program settings on most Radionics panels.
Without a valid code, your only options are limited to calling in a Radionics alarm dealer, or replacing the system. The panel and keypads are the key elements that must be replaced. The door and window contacts, motion sensors, and often even the low-voltage smoke detectors are basically generic, and can be used with any brand of alarm system.
0コメント